Frame Relay

Frame relay Lab preparation
Simplest Lab 
-------------------

Inverse ARP is enabled by default
Only configure Fram-rely encapsulation and that’s all
Default network is pass on //show frame-relay map

R0
---
interface Serial0/0
ip channelize 10.1.1.1 255.255.255.0
encapsulation frame-relay

R1
---
interface Serial0/0
ip address 10.1.1.2 255.255.255.0
encapsulation frame-relay
Show commands:

R0#sh frame-relay lmi

LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI graphic symbol = ANSI
shut-in Unnumbered info 0 Invalid Prot magnetic disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid shape Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report prayer 0 Invalid Keep IE Len 0
Num precondition Enq. send 84 Num Status msgs Rcvd 85
Num Update Status Rcvd 0 Num Status Timeouts 0
Last Full Status Req 00:00:08 Last Full Status Rcvd 00:00:08

R0#sh int s0/0
Serial0/0 is up, line protocol is up
Hardware is GT96K Serial
Internet address is 10.1.1.



1/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not wane
Keepalive set (10 sec)
CRC checking enabled
LMI enq sent 103, LMI stat recvd 104, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI append D frame relay DTE segmentation inactive //
FR SVC disabled, LAPF state down
Broadcast aline 0/64, broadcasts sent/dropped 1/0, interface broadcasts 0
Last input 00:00:02, output 00:00:02, output diminish never
Last clearing of show interface counters 00:17:52
stimulant drug queue: 0/75/0/0 (size/ liquid ecstasy/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max good/threshold/drops)...If you want to get a full essay, align it on our website: Orderessay



If you want to get a full essay, wisit our page: write my essay .